Marine Grade Aluminium 5000K Bridgelux IP68 LED Flood Light
Marine grade aluminium epoxy powder coated body IK09 IP68 LED Flood
Light 100W
Advantages:
1. LCD-CES-J ranges are approved by UL844, ATEX, IECEX, which
designed specifically for harsh & hazardous environments, and been
widely installed for Zone 1 & 2 applications and rated for T5 and
T6 environments.
2 LCD-CES-J work suitable for all the spaces where it is restricted
with its compact, low profile design.
3. Adopt marine grade waterproof aluminum housing LCD-CES-J can
survive the most extreme environments with protective grade
IP67/68.
Applications:
Explosion proof grade LCD-CES-J Floodlights are suitable for all
Zone 1&2 hazardous locations, Gas Stations, Petroleum &
Chemical industry, Coal Mines, Military, Airports, Wareshouses,
Marine and Public Swimming Pools.
Atex information:
UL844 : C1D2
IECEX: Zone 2
ATEX: Zone 1&2
Gas: II 2 GD Ex e mb op is IIC T* Gb
Dust:II 2D Ex tb op is IIIC T* Db
IP67 & IP68
Products Descriptions as follow:
| Product Name | Explosion proof Light |
| Model | LCD-CES-J |
| Certifications | UL844, IECEX, ATEX |
| Atex standard | Zone1&2, C1D2 |
| Power | 100W |
| Input | 100~277VAC |
| CCT | 3000K, 5000K, 6500K |
| Lumens | 13000lm |
| Led Light Source | Bridgelux |
| Cri (ra>) | 75 |
| Beam Angle | 25 / 60 / 90 / 120 |
| LED Driver | Meanwell |
| Frequency | 50/60 Hz |
| Power Fact | 0.95 |
| Dim | Yes |
| Ip Rating: | 65 / 67 / 68 |
| IK Grade | 09 |
| Life Time | 50.000Hr |
| Working Temperature | -40~+50 |
| Lamp Body Material | Aluminum+Temper glass+Stainless Steel#316 |
| Warranty | 5 years warranty |
Electrical information
1. Termination: Incoming terminal block suitable for looping 4 core
4mm² cable.
2. Cable Entries: 4xM20 as standard (other entries available upon
request), dispatched complete with three ATEX/IEC Ex approved
blanking plug
Install Instruction:
1. Turn off Power supply to avoid the risk of electrical shock.
2. Proper grounding is required to ensure personal safety.
3. Make certain power is off before starting installation or
maintenance.
4. Do not recess the fixture.
5. A qualified electrician should do all work.
6. Do not touch the led chips, damage may occur.
