Ceiling Mount 2700K 3030 SMD Industrial Flood Lights LED
LED rating 24000lm IP65/IK08 rated 140lm/w 150W Industrial LED
Flood Light
| Wattage | 150W |
| Luminous Flux | 140lm/w; Total 24000lm |
| Light source | 3030 SMD LED |
| Input Voltage | 100-277VAC |
| Installation | Ceiling Mount |
| Lamp Paint | White |
| Model Noumber | LCD-FT-153 |
| Colour Temperature | 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW |
| Power Factor | >0.95 |
| Beam Angle | 120 ° |
| Color Rendering Index (CRI) | >85 |
| LED Emitter Life | 50,000 hours |
| Operating Temperature | -40°C ~ 45°C |
| The Dimensions | L380*W380*H68 |
| Warranty | 5 years |
| Application | the fixture is designed with aesthetics in mind, with a low profile
design to make it visually appealing for applications such as ATM
drive-throughs, hotels, airports and gas stations, Made of sturdy
cast aluminum. |
Key Advantages
1. Respirator Design
Balance difference pressure between atmosphere and Shell, it's
waterproof also defog and avoiding the drop condensation, reducing
the inside salt corrosion and prolong lifespan.
2. Using special waterproof connector and silicone rubber
Sealing process, IP65,satisfy all kinds of requirement of bad
outdoor environment.
3. Electophoresis process,
4 years salt and mist atmosphere testing, excellent anti-corrosion
anti-rust performance, suitable for bad outdoor environment.
4. Toughened glass panel
4mm tempered glass panel,Stronger protection LED light source, and
the light transmission rate of more than 93%.
5. High quality pure Aluminum Housing
Elegant appearance, sturdy and durable, Heat dissipate fin and
housing as a whole, high efficiency thermal management.
6. Waterproof Connector & Stainless steel fittings
The Fittings resistance to air, water, acid, alkali, salt and other
chemical corrosion solution, suitable for long-term use in a
variety of adverse circumstances.
Technical data
| Model | Power(W) | Current(A@230VAC) | IP-protection | Dimensions(mm) | Weight(KG) |
| LCD-FT-013 | 10 | 0.045 | IP65 / IK08 | 185x135x68 | 0.75 |
| LCD-FT-023 | 20 | 0.091 | IP65 / IK08 | 185x135x68 | 0.85 |
| LCD-FT-033 | 30 | 0.137 | IP65 / IK08 | 220x180x88 | 1.30 |
| LCD-FT-053 | 50 | 0.228 | IP65 / IK08 | 220x180x88 | 1.50 |
| LCD-FT-073 | 70 | 0.320 | IP65 / IK08 | 260x195x105 | 1.80 |
| LCD-FT-103 | 100 | 0.460 | IP65 / IK08 | 305x250x125 | 4.80 |
| LCD-FT-123 | 120 | 0.550 | IP65 / IK08 | 305x250x125 | 5.00 |
| LCD-FT-153 | 150 | 0.690 | IP65 / IK08 | 305x250x125 | 5.30 |
| LCD-FT-203 | 200 | 0.910 | IP65 / IK08 | 400x360x140 | 8.10 |
| illumination distribution |  |
| Product dimension |  |
installation
1. Carefully take the product out of the packaging removing any
transport safeguards.
2. The product is solely suited for installation on the wall,
ceiling and floor.
3. This product must be installed by a preofessional electrician.
4. Please make sure that the thermal management can work without
problem. Take a look at picture below.
5. Fasten the fixture to the installation place using properly
dimensioned fastening materials.
6. Connect the floodlight with a power source.
7. Check if the product functions properly and if it is securely
fixed
8. The product is now ready for operation.
| Wall mounted | Surface mounted | Ceiling mounted |
 |  |  |
III. warning
The installation should only be done by a professional electrician!
Warranty for this product is 5 years.
The warranty expires by abnormal usage, connection or change of the
structure. Damage by high voltage is not covered by the warranty:
>4kV(L,N to PE) / 2kV(L to N)
For more technical information, please contact our customer
support!
Product exploded view
