High Bay Explosion Proof 10 Watts Led Flood Light IP65
Explosion proof led high bay lighting 10W 220VAC 50/60Hz 65000K
1300lm IK08 IP65
ATEX LED Batten floodlight introduction
The light is designed with type of protection “Ex nR” and is
available in three standard sizes.
For the electrical connection, two M20x1.5 cable glands are
provided to house the cable glands or blanking plugs, approved for
the explosion protected area. The batten light fitting may be
installed using wall / ceiling / pendant as well as pole mounting.
Benefits
- Lights for every application
- Wide range of accessories
- Extensive services
Industries
- Oil & gas
- Pharmaceutical industry
- Chemical industry
- Mechanical engineering/OEM
- Energy
Marking
II 3G Ex nR IIC T6 G
II 3D Ex tc IIIC T80 ℃ Dc IP66
IECEX Standard
EN 60079-0:2012/A11:2013; IEC60079-0:2011 Edition 6.0; EN
60079-15:2010; IEC 60079-15:2010 Edition 4.0; EN 60079-31:2014;
IEC60079-31:2013 Edition 2.0.
Power range
| MODEL WATTAGE | 10/20W | 40W | 60W |
| LUMEN OUTPUT | 1300-2400 LM | 4800 LM | 7200 LM |
| DIMENSIONS | 28.3 x 4.4 x 5 in | 40 x 4.4 x 5 in | 52 x 4.4 x 5 in |
| (720 x 113 x 125 mm) | (1020 x 113 x 125 mm) | (1320 x 113 x125 mm) |
| NET FIXTURE WEIGHT (with PM type of mounting) | 7.5 lbs (3.4 kg) | 8.4 lbs (3.8 kg) | 9.25 lbs (4.2 kg) |
| ENCLOSURE MATERIAL | Copper free aluminum alloy and PC pipe |
| FINISH | High voltage electrostatic spraying surface |
| HARDWARE AND MOUNTING | Stainless steel parts and screws with high anti-corrosion
performance |
| CABLE GLANDS AND CONNECTORS | Classified for CID1 nickel plated brass adapter from Atex Ex nR M27 |
| LENS | N/A |
| LIGHT SOURCE | Lumiled 3030 |
| COLOR RENDITION INDEX (CRI) | > 80 |
| INPUT POWER (+25°C) | 20W | 40W | 60W |
| FIXTURE EFFICIENCY | 120 LPW | 120 LPW | 120 LPW |
| LED DRIVER | Lifud | Lifud | Lifud |
| 100-240VAC | 100-240VAC | 100-240VAC |
| LED DRIVER PROTECTION | Short circuit, over load protection, over voltage, open circuit
protection | Short circuit, over load protection, over voltage, open circuit
protection | Short circuit, over load protection, over voltage, open circuit
protection |
| SURGE PROTECTION | 4 kV | 4 kV | 4 kV |
| POWER FACTOR | > 0.9 | > 0.9 | > 0.9 |
| THD (total harmonic distortion) | <20% | <20% | <20% |
| INRUSH CURRENT | <60А | <60А | <60А |
| AMBIENT OPERATING TEMPERATURE | -30°C to +50°C | -30°C to +50°C | -30°C to +50°C |
| T-RATING for (+55°C) | Т6 | Т6 | T6 |
| FIXTURE LIFE (+25°C) | >50 000 hours | >50 000 hours | >50 000 hours |
| FIXTURE LIFE (+55°C) | N/A | N/A | N/A |
| FIXTURE LIFE (+65°C) | N/A | N/A | N/A |
| WARRANTY | 5 Year | 5 Years | 5 Years |
Zones 2 & 21or 2 & 22
Linear type luminaire
LCD-BHD51 Ex LED luminaire is also intended for general lighting
industrial high bays and:
• spaces classified to zone 2,22 (optionally 21) hazardous by dust,
gas, vapour and mist of flammable
liquids explosion in temperature class up to T6
• luminaire for indoor or outdoor use
• additional spaces where occurence of high dust concentration and
water splashes are possible, such as:
boiler-rooms, wash-rooms, garrages, island station roofs,
warehouses, processing lines for chemical industry,
oil and gas industry,loose mining and building material industry
etc.
Advantages
• robust and compact design
• quick, simple and easy installation
• optional installation of lampshade on hinges during
fluorescent lamp replacement
• high resistance to a corrosive industrial environment,
• high luminous efficacy- 0.9
• high-quality ignition systems
• UV-resistant
CONSTRUCTION
LCD-BHD51 series of explosion-proof LED linear light is designed
and manufactured with a small size, light weight, long life,
pollution-free, maintenance-free, safe, energy saving, durable and
environmental-friendly Explosion-proof LED linear light.
Housing: high light transmittance PC material , the strength of more than
4J, can reduce the damage to the light in the abnormal operation.
Diffuser: PC polycarbonate plastic
Gasket(waterproof O-ring): Nitrile rubber, good aging and corrosion resistance.
Light shell: Aluminum alloy high pressure die-casting, with good
microstructure, hardness and wear resistance
Fasteners: STS304 stainless steel with high corrosion resistance and high
strength
The light fitting accessories and lamp housing split structure
design, easy installation and maintenance; selection of imported
light source chip energy saving, environmental protection, high
brightness, life expectancy up to 100,000 hours.
