High Lumen Output Dimmable IP65 LED SMD Flood Light 100W
High lumen output 150 lm/w IP65 waterproof 100W LED SMD Flood Light
for Outdoor
Outdoor LED Flood Lights
LED flood lights are great for outdoor general area lighting and
landscape lighting.
Our wide selection of outdoor LED lights includes products with
motion sensors to maximize your savings.
Using a motion sensor can reduce your energy usage and increase a
light's lifetime by only turning on when necessary.
LED flood lights with motion sensors are also great for security.
Motion sensors can spook criminal and keep your property safe.
Advantages:
HIGH EFFICIENCY, LOW POWER CONSUMPTION 60% energy saving compare to
sodium light.120° flood beam angle, no shadow and glare, super
bright.AC85-265V
SAFETY AND FAVORABLE WATERPROOF EFFECT IP65 waterproof rating
ensure your light work very well in all kinds of weather. Long
lifespan up to 50,000 hours. Good heat dissipation.
MORE SAFE No Lead and Mercury. No Hazardous Emissions. No UV or IR
Radiation. No harm to the environment and human health.
PERFECT FOR OUTDOOR LIGHTING Widely used in garden ,statue, parking
lot, billboard, stadium, square, sport center, private house,
warehouse , dock, port, building site,factory etc.
FRIENDLY CUSTOMER SERVICE: Professional customer service available
all the time.
High lumen output 150 lm/w IP65 waterproof 100W LED SMD Flood Light
for Outdoor lighting
FS Family
| Item | 10W | 20W | 30W | 50W | 80W | 100W | 150W | 200W |
| Input Voltage | 90-265VAC or 12-28VDC |
| Input Current | 0.05A | 0.1A | 0.15A | 0.23A | 0.38A | 0.48A | 0.7A | 0.93A |
| Power Efficiency | >89% | >89% | >89% | >95% | >97% | >97% | >97% | >97% |
| LED Consumption | 9W | 18W | 27W | 45W | 72W | 91W | 135W | 185W |
| System Consumption | 10W | 20W | 30W | 50W | 80W | 100W | 150W | 200W |
| Power Factor | >0.95 |
| Total Harmonic Distortion | THD< 20% |
| Dimmable | 1-10V , DALI ,Triac on requests |
| Power Line | 1.0m㎡three line |
| Chip Brand | LUMILEDs/CREE/Bridgelux / OSRAM (SMD3030) / SMD5050 on requests |
| LED Encapsulation | 12LEDs | 24LEDs | 36LEDs | 60LEDs | 96LEDs | 120LEDs | 180LEDs | 240LEDs |
| Rated LED Efficacy | 160-180 lumen/w |
| Luminous Efficiency | 130-160 lumen/w |
| Color Temperature | 3000K / 4000K / 6500K |
| Luminous Output (Typ.) | 1350lm | 2700lm | 4050lm | 6750lm | 10800lm | 13500lm | 20250lm | 27000lm |
| CRI | Ra> 80 |
| SCDM | SDCM <5 |
| Lumen Maintenance | > 80%@50,000h |
Light Technical
Upward light output ratio 0
Standard tilt angle posttop 0°
Standard tilt angle side entry 0°
Operating and Electrical
Input Voltage 100 to 277 VAC or 12-28 VDC
Input Frequency 50 to 60 Hz
Inrush current 340 A
Inrush time 0.025 ms
Power Factor (Min) >0.95
Controls and Dimming
Dimmable on requests 1-10V , DALI , Triac
Mechanical and Housing
Housing Material Aluminum die-cast 6063
Reflector material Polish Aluminum
Optic material Acrylate
Optical cover 4mm temper Glass
Fixation material corrosion resistant powder coating carbon Steel
Mounting device Mounting bracket adjustable
Optical cover Flat
Optical cover Clear
Approval and Application
Ingress protection code IP65 [ Dust penetration-protected,
jet-proof]
Mech. impact protection code IK08 [ 5 J vandal-protected]
Surge Protection Luminaire surge protection level >2 kV
Initial Performance (IEC Compliant)
Initial luminous flux (system flux) 13000-16000 lm
Luminous flux tolerance +/-6%
Initial LED luminaire efficacy 130-160 lm/W
Init. Corr. Color Temperature 3000K 4000 K 6500K
Init. Color Rendering Index ≥75
Initial chromaticity (0.380, 0.390) SDCM <5
Initial input power 100 W
Power consumption tolerance +/-10%
Product cut sheet
Over Time Performance (IEC Compliant)
Driver failure rate at 7000 h 0.5 %
Useful life L80B10 100000 h
Lumen maintenance at useful life of 100000 h,at 25 °C
Application Conditions
Ambient temperature range -30 to +45 °C
